How to source obsolete automation parts and reduce downtime

November 11, 2026. 6 mins read
Share

A single obsolete component can cause significant production downtime when a replacement is difficult to source. For manufacturers operating older equipment, discontinued PLCs, drives and control modules present an ongoing challenge for maintenance and procurement teams.

According to Z2Data, 621,909 electronic components reached end-of-life in 2025 across the wider electronics industry [1]. As industrial equipment often remains in service for decades, components can become obsolete long before the machinery they support needs replacing.

When an obsolete part fails, manufacturers must identify a compatible replacement, assess its condition and source it within an acceptable lead time. Understanding the available options and planning for component obsolescence can help reduce downtime, control costs and extend equipment life. For the wider picture, from lead times to supplier risk, read our complete guide to sourcing and managing automation components in a disrupted supply chain.

What makes an automation component obsolete?

A component becomes obsolete when its manufacturer discontinues production. However, this does not necessarily mean the part is no longer available or suitable for use.

Manufacturers typically manage products through defined lifecycle stages, which may include active production, phase-out, discontinuation and end-of-support. The terminology and timeframes vary between manufacturers.

A discontinued part may still be available through remaining manufacturer stock, independent suppliers or the secondary market. Equally, a component can remain operational for years after its manufacturer stops producing it.

In practice, many plants only realise a component is obsolete when it fails and they discover that a replacement is no longer available through their usual suppliers.

Advance notification is not always provided. Z2Data found that 52% of electronic components discontinued in 2025 had no accompanying manufacturer product change notification (PCN) recorded in its analysis [1].

This makes it important for maintenance and procurement teams to monitor product lifecycle information rather than relying on component availability alone. Identifying parts that have already been discontinued, or are approaching end-of-life, allows businesses to consider replacement options before a failure occurs.

Why obsolete components can increase maintenance costs

Component obsolescence can introduce costs beyond the purchase price of a replacement. These depend on the availability of suitable parts, the importance of the equipment and whether modifications are required to keep it operational.

Limited availability and higher replacement costs

As manufacturer stock becomes depleted, businesses may need to source components through specialist suppliers. Prices can increase when availability is limited, particularly for parts still widely used in industrial equipment.

Unplanned downtime

When a critical component fails without an available spare, production may be interrupted while a suitable replacement is located. The financial impact depends on the equipment affected, the duration of the interruption and the availability of alternative production capacity.

Engineering and replacement costs

Where a direct replacement is unavailable, manufacturers may need to modify equipment or upgrade to a newer system. This can involve engineering work, software changes, commissioning and validation.

Research published by Z2Data estimates that product redesigns resulting from electronic component obsolescence can cost between US$20,000 and nearly US$2 million, depending on their complexity [2].

These considerations highlight the value of planning ahead. Identifying critical components and securing suitable spares can reduce exposure to emergency purchases and unexpected downtime. In other cases, a planned upgrade may be more economical than continuing to maintain ageing equipment.

The most appropriate approach depends on the component, the expected remaining service life of the equipment and the cost of each available option.

Older PLC module being inspected on a workbench, with its part number and hardware revision label clearly visible

How to source discontinued automation parts

When a component is no longer available through its original manufacturer, there are several options for maintaining the equipment it supports.

1. Source an original replacement

Finding the same component is often the most straightforward option, particularly when existing equipment cannot easily be modified.

Original parts may remain available as unused stock, used components or reconditioned units, even after the manufacturer has discontinued production.

However, matching the original part number is not always sufficient. Hardware revisions, firmware versions and configuration requirements may affect compatibility with the existing system.

Buyers should confirm these details before ordering and establish whether any additional installation, testing or validation work will be required.

2. Repair or refurbish the existing component

Repair can be a practical option when a direct replacement is difficult to obtain.

Depending on the fault and the availability of suitable internal components, specialist repair services may be able to restore a failed unit to operational condition.

This approach can extend the service life of existing equipment without requiring wider system modifications. However, repair times, costs and reliability should be assessed against the availability of replacement units.

3. Upgrade to a current alternative

If sourcing or repairing the original component is no longer viable, replacing it with a supported alternative may be necessary.

Manufacturers sometimes provide recommended successor products, although these are not always direct replacements. Changes to hardware, communication protocols, software or installation requirements may be needed.

Upgrading can provide longer-term support and reduce future obsolescence risks. However, the associated engineering and commissioning requirements mean it is generally better planned in advance rather than undertaken in response to an unexpected failure.

What to check when purchasing obsolete automation parts

Sourcing discontinued equipment requires additional care, particularly when purchasing from suppliers outside the manufacturer's authorised distribution network.

Before placing an order, buyers should confirm the exact part number and any relevant hardware or firmware revisions. The component's condition, compatibility and delivery timeframe should also be established.

Supplier reliability is equally important. Look for clear information about testing procedures, warranty coverage and product traceability where available.

Purchasing from established suppliers with appropriate quality controls helps ensure parts are as described. Where possible, establish the component's condition and available history, confirm what testing has been completed and understand the warranty arrangements. For critical applications, additional inspection and validation may be necessary before installation.

EU Automation specialises in sourcing new, reconditioned and obsolete automation components through a global network of suppliers. All parts supplied by EU Automation are tested before dispatch and include a standard 12-month return-to-base warranty, subject to the applicable terms.

This provides an alternative sourcing route for manufacturers maintaining equipment that is no longer supported through standard distribution channels.

For further guidance, see our guide to managing lead time in the supply chain.

How to build an obsolescence management plan

Rather than responding to component obsolescence only when equipment fails, manufacturers can take a more structured approach.

IEC 62402:2019 provides requirements and guidance for managing obsolescence throughout the lifecycle of products and systems [3]. Its principles can be applied to industrial automation equipment, helping businesses identify potential supply problems and plan appropriate responses.

A practical obsolescence management plan should include five steps:

  1. Identify critical components. Create a register of parts used in essential equipment, including manufacturer details, part numbers and installed quantities.
  2. Monitor lifecycle status. Check manufacturer announcements and product lifecycle information to identify components approaching end-of-life or already discontinued.
  3. Assess operational risk. Prioritise components based on their importance to production, likelihood of failure, replacement availability and potential downtime costs.
  4. Establish replacement strategies. Determine whether critical components require spare stock, an alternative supplier, a repair option or a planned system upgrade.
  5. Review regularly. Update the register as components are discontinued, equipment changes and replacement options become available.

Holding spare parts can be particularly valuable for critical equipment where a failure would cause significant disruption. However, stock decisions should account for costs, storage conditions and the expected remaining service life of the equipment.

The objective is to identify potential supply risks early enough to make informed purchasing and maintenance decisions.

Our article on obsolescence management in safety-critical sectors explores how these principles apply in industries where equipment reliability is especially important.

Conclusion

Obsolete automation components are a continuing challenge for manufacturers operating long-life industrial equipment. While discontinuation can make replacement parts harder to obtain, it does not automatically mean the equipment itself needs replacing.

By monitoring product lifecycles, identifying critical spares and establishing reliable sourcing options, maintenance and procurement teams can reduce the risk of unexpected downtime and avoid unnecessary replacement costs.

Where original components are no longer available through standard distribution channels, specialist suppliers can provide an alternative.

EU Automation helps businesses source hard-to-find and discontinued automation components, supporting the maintenance of existing equipment and giving manufacturers more flexibility over when to upgrade.

Contact EU Automation to discuss availability and sourcing options for obsolete automation parts.

References

[1] Z2Data, Components Are Going EOL Without Product Change Notifications at Alarming Rates, March 2026.

[2] Z2Data, Understanding Obsolescence in the Electronics Industry, July 2024.

[3] International Electrotechnical Commission, IEC 62402:2019 – Obsolescence management.

Most popular

How to find obsolete automation parts without risking downtime
Blog 1 min read

How to find obsolete automation parts without risking downtime

Learn how to source obsolete automation parts, reduce downtime risks and manage component obsolescence effectively. Explore sourcing options, compatibility considerations and long-term planning strate...

Read more
John Young - EU Automation
Interview 1 min read

John Young - EU Automation

Shedding some light on the ins and outs of successful automation adoption.

Read more
Mitigating risks and cybersecurity when implementing AI
Blog 1 min read

Mitigating risks and cybersecurity when implementing AI

Explore the dual role of artificial intelligence technologies in enhancing risk management and presenting new AI cyber security challenges in manufacturing and supply chain management.

Read more

Speak to our team

Whether you need advice or help finding the right part, our team is available to assist and keep your operations running smoothly.