steve
Got hold of Sime for a Carrier card for…
Got hold of Sime for a Carrier card for a chiller. Machine down in a factory. Received the new card in express time machine and plant now up and running fantastic service form Sime
3 months ago
XY2CH13470
Schneider XY2CH13470 available at EU Automation. Get in touch today for a quick price.
Based on over 4900 reviews
Full 12-month warranty
Available for dispatch immediately
We deliver worldwide
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
All orders are subject to product availability. See our T&Cs.
Ask our team
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
The Schneider XY2CH13470 is a Telemecanique Preventa XY2 Series latching emergency stop rope pull switch designed for machine guarding and conveyor applications where an accessible stop function is required along a cable run. This red RAL 3000 XY2CH unit features a robust Zamak body with a stainless steel cover, a key-release pushbutton reset, and support for a single trigger cable up to 30 m in length. It is equipped with 2 normally closed slow-break contacts with positive opening operation, screw clamp terminals for 0.5 to 1.5 mm² conductors, and three Pg 13.5 tapped cable entries for installation flexibility.
Rated for 500 V insulation voltage and 10 A conventional enclosed thermal current, the XY2CH13470 supports AC-15 operation at 3 A, 240 V and DC-13 operation at 0.27 A, 250 V. The device offers IP65 ingress protection, mechanical durability of 800,000 cycles, and operation across an ambient temperature range of -25 to 70 °C. With compliance to relevant EN/IEC standards and suitability for high-performance monitored control systems when correctly wired, this rope pull switch is well suited to industrial stop-control applications across manufacturing, handling, and processing equipment.
Rated for 500 V insulation voltage and 10 A conventional enclosed thermal current, the XY2CH13470 supports AC-15 operation at 3 A, 240 V and DC-13 operation at 0.27 A, 250 V. The device offers IP65 ingress protection, mechanical durability of 800,000 cycles, and operation across an ambient temperature range of -25 to 70 °C. With compliance to relevant EN/IEC standards and suitability for high-performance monitored control systems when correctly wired, this rope pull switch is well suited to industrial stop-control applications across manufacturing, handling, and processing equipment.
| Specification | Description |
|---|---|
| Manufacturer | Schneider |
| Part Number | XY2CH13470 |
| Product Type | Latching emergency stop rope pull switch |
| Series / Range | Telemecanique Preventa XY2 / XY2C rope pull switches |
| Device Short Name | XY2CH |
| Contact Configuration | 2 normally closed contacts |
| Contact Operation | Slow-break |
| Reset Method | Key-release pushbutton |
| Key Number | 421 |
| Housing Color | Red, RAL 3000 |
| Local Signaling | Without pilot light |
| Number of Cables | 1 |
| Maximum Trigger Cable Length | 30 m |
| Trigger Cable Anchor Point | Right-hand or left-hand side |
| Body Material | Zamak |
| Cover Material | Stainless steel |
| Terminal Type | Screw clamp terminals, 1 x 0.5 mm² to 2 x 1.5 mm² |
| Tightening Torque | 0.8 to 1.2 N.m |
| Cable Entries | 3 tapped entries for Pg 13.5 cable glands |
| Rated Operational Current | 3 A at 240 V AC-15, A300; 0.27 A at 250 V DC-13, Q300 |
| Conventional Enclosed Thermal Current | 10 A |
| Rated Insulation Voltage | 500 V conforming to EN/IEC 60947-1; 300 V conforming to UL 508 |
| Rated Impulse Withstand Voltage | 6 kV |
| Short-Circuit Protection | 10 A gG cartridge fuse |
| Positive Opening | Yes, conforming to EN/IEC 60947-5-1 |
| Mechanical Durability | 800,000 cycles |
| B10d Reliability Data | 4,000,000 operations |
| Protection Rating | IP65 conforming to IEC 60529 |
| Operating Temperature | -25 to 70 °C |
| Storage Temperature | -40 to 70 °C |
| Vibration Resistance | 10 gn, 10 to 150 Hz, conforming to EN/IEC 60068-2-6 |
| Shock Resistance | 50 gn for 11 ms, conforming to EN/IEC 60068-2-27 |
| Standards | EN/IEC 60947-5-1, EN/IEC 60947-5-5, EN/ISO 13850, EN/IEC 60204-1 |
| Certifications | UL category NISD emergency stop devices, CCC |
| Net Weight | 0.91 kg |
| Approximate Dimensions | 201 x 68 x 95 mm |
| Commodity Code | 85365080 |
What type of device is this?
This is a latching emergency stop rope pull switch designed for machinery applications where an emergency stop command must be activated by pulling a tensioned cable. It is part of the Telemecanique Emergency Stop Rope Pull Switches XY2C range and uses a key-release pushbutton reset.
How many contacts does this rope pull switch have?
The switch has 2 normally closed contacts. The contact operation is slow-break, and the device includes positive opening in accordance with EN/IEC 60947-5-1.
What is the maximum trigger cable length?
The maximum trigger cable length is 30 m, or approximately 98.43 ft. The device is designed for one cable and can be anchored from either the right-hand or left-hand side.
How is the switch reset after actuation?
After the rope pull mechanism is activated, the switch is reset using a key-release pushbutton. The specified key number for this model is 421.
What electrical ratings apply to this switch?
The rated operational current is 3 A at 240 V AC-15, A300, and 0.27 A at 250 V DC-13, Q300. It also has a conventional enclosed thermal current of 10 A, a rated insulation voltage of 500 V under EN/IEC 60947-1, and a rated impulse withstand voltage of 6 kV.
What type of terminals are used for wiring?
The switch uses screw clamp terminals suitable for 1 x 0.5 mm² to 2 x 1.5 mm² conductors. The recommended tightening torque is 0.8 to 1.2 N.m.
What cable entry arrangement does the enclosure provide?
The enclosure includes 3 tapped entries for Pg 13.5 cable glands, giving installers flexibility when routing wiring into the switch body.
What materials are used in the construction?
The body is made from Zamak and the cover is stainless steel. The housing color is red, RAL 3000, which is typical for emergency stop devices.
What environmental protection rating does this switch have?
The device has an IP65 degree of protection in accordance with IEC 60529, helping protect it against dust ingress and low-pressure water jets when properly installed.
What operating temperature range is specified?
The operating temperature range is -25 to 70 °C, equivalent to -13 to 158 °F. The storage temperature range is -40 to 70 °C, equivalent to -40 to 158 °F.
Which standards and approvals are associated with this device?
The switch is associated with standards including EN/IEC 60947-5-1, EN/IEC 60947-5-5, EN/ISO 13850, EN/IEC 60204-1, Machinery Directive 2006/42/EC, and Work Equipment Directive 2009/104/EC. Product certifications include UL category NISD emergency stop devices and CCC.
What performance level can it reach when correctly integrated?
With an appropriate monitoring system and correct wiring, XY2CH13470 can reach PL = e and category 4 according to EN/ISO 13849-1, and SIL 3 according to EN/IEC 61508.
What are the physical size and weight details?
The listed dimensions are 201 x 68 x 95 mm. The net weight is approximately 0.91 kg, or 2.01 lb.
- Emergency stop rope-pull control on conveyor systems
- Perimeter stop actuation for long machinery runs
- Operator-accessible stop points along production lines
- Material handling equipment where a pull-cord stop is required
- Packaging machinery with extended operator access areas
- Assembly line installations requiring manual stop activation from multiple positions
- Industrial processing equipment with cable-operated stop functions
- Warehouse automation systems using conveyor pull-cord stations
- Machine guarding layouts requiring a latching stop switch
- Replacement of worn or damaged Schneider XY2CH rope pull switches
This content has been produced using multiple sources. EU Automation takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Delivery
- Logistic partners UPS, FedEx and DHL
- International delivery available
- Premium nine hour delivery service available to anywhere in Europe
- Same day dispatch from group stock
Warranty
All parts new or reconditioned are covered by EU Automation 12 month warranty
Returns
No hassle returns policy
Dedicated customer support team
Payment
Trade CreditWe understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
Payment optionsWe accept Bank transfers and the following methods of payment:
All transactions are handled securely by HSBC and HSBC Merchant Services. For more information, please visit our dedicated payments page.
Services
Sourcing your part
Global supplier of quality automation and control components
Service Exchange
Dispose of your old unit by exchanging it for a working part.
Repair
A comprehensive repair service for faulty equipment.
Customer reviews
steve
Daniel
Excellent customer service...
Alex Bailey is my main point of contact at EU Automation...he is extremely friendly, has exceptional customer service skills and always offers great pricing & lead times.
5 months ago
Jerry Schrink
Tom Higgins provided amazing service
Tom Higgins provided great prompt service. I contacted Tom by phone and within 10 minutes there was a quote in my in box. WOW Thank you Tom and Thank you EU Automation!
5 months ago
Paulo Pereira
Excellent service and communication…
Excellent service and communication from Alex Bailey. He truly goes above and beyond to ensure his clients are 100% satisfied. The entire process was seamless, and his attention to detail made a huge difference. Highly recommended for anyone looking for amazing service!
5 months ago
Gary
Tom Higgins did a great job at getting…
Tom Higgins did a great job at getting us the part we needed. He saw a concern with the part a verified before shipping.
6 months ago
Lessle Smith
Thomas Higgins has gone above and…
Thomas Higgins has gone above and beyond to make things happen for my facility. His customer service and knowledge were an asset in helping me with my order and the logistics challenges!
6 months ago
Be a Factory Hero.
Get parts fast.
You don’t need tights and a cape to be a hero.
Get parts fast and feel like a legend, just like Jeff.