1454972

What type of component is this?

This is an M12 Y-distributor designed to divide one 8-position connection into two parallel M12 connections for sensor and actuator cabling.

What connector configuration does the distributor use?

It has one straight 8-position M12 male plug and two straight 8-position M12 female sockets. All three connections use standard A-coding and SPEEDCON coupling.

How are the two output sockets connected?

The outputs are wired as a parallel distributor, allowing the corresponding contacts from the incoming M12 plug to be presented at both female sockets.

What is the rated operating voltage?

Phoenix Contact 1454972 is rated for 30 V AC or 30 V DC.

What is the rated current?

The rated current is 2 A at an ambient temperature of 40°C.

What ingress protection does the component provide?

The distributor carries IP65 and IP67 protection ratings when correctly connected and installed, making it suitable for demanding industrial environments.

What is the permitted operating temperature range?

The specified ambient operating temperature range is from -25°C to 90°C for the plug and socket connections.

Which M12 coding standard does it follow?

The connections are A-coded and conform to the IEC 61076-2-101 standard for M12 connectors.

Does the distributor include a status indicator?

No. This is a passive parallel distributor and does not incorporate a status display.

What tightening torque should be used for the M12 connectors?

The specified tightening torque is 0.4 Nm. Applying the correct torque helps establish a secure mechanical connection and maintain the intended ingress protection.

What materials are used in its construction?

The contacts are made from CuZn with a nickel and gold surface finish. The contact carrier is glass-fibre-reinforced TPU, the grip body is self-extinguishing TPU, the knurled sections are nickel-plated zinc die-cast, and the seals are NBR.

How many connection cycles is it designed to withstand?

The distributor is specified for at least 100 insertion and withdrawal cycles.

What is the insulation resistance?

The specified insulation resistance is at least 100 MΩ.

What is the spacing between the two female connections?

The centre-to-centre distance between the connections is 21 mm.

How much does the distributor weigh?

The component weighs approximately 32 g per piece, excluding packaging.

What accessories can be used with unused M12 connections?

Compatible M12 screw plugs and sealing caps can be fitted to unoccupied sockets or plugs to preserve the integrity of unused connection points.

What tools are suitable for tightening the connections?

A preset 0.4 Nm torque screwdriver and a compatible M12 assembly bit with a 4 mm hexagonal drive can be used to tighten the connectors consistently.

What are typical applications for this component?

Typical uses include splitting sensor or actuator connections in industrial machinery, factory automation assemblies, control installations and field-level cabling systems that use 8-position A-coded M12 interfaces.