steve
Got hold of Sime for a Carrier card for…
Got hold of Sime for a Carrier card for a chiller. Machine down in a factory. Received the new card in express time machine and plant now up and running fantastic service form Sime
3 months ago
0800394
Phoenix Contact 0800394 available at EU Automation. Get in touch today for a quick price.
Based on over 4900 reviews
Full 12-month warranty
Available for dispatch immediately
We deliver worldwide
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
All orders are subject to product availability. See our T&Cs.
Ask our team
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
The Phoenix Contact 0800394, designated WMS 2,4 (30X4)RXL, is a white heat-shrink sleeve marker for identifying wires and cables in electrical assemblies. Supplied unprinted on a roll, it features a 30 × 4 mm marking area and accommodates cable diameters from 0.8 to 2.4 mm.
Manufactured from halogen-free polyolefin, the sleeve slides over the conductor before being heat-shrunk into position. It remains flexible after shrinking and provides additional electrical insulation and mechanical protection. Perforations allow individual markers to be separated as required.
Each roll contains 5,000 labels arranged in two rows. Suitable for printing with Phoenix Contact THERMOMARK ROLL, THERMOMARK ROLL X1 and THERMOMARK X1.2 printers, this sleeve marker offers a practical solution for organised cable identification in control panels and industrial wiring installations. Its operating temperature range is −55°C to +135°C.
Manufactured from halogen-free polyolefin, the sleeve slides over the conductor before being heat-shrunk into position. It remains flexible after shrinking and provides additional electrical insulation and mechanical protection. Perforations allow individual markers to be separated as required.
Each roll contains 5,000 labels arranged in two rows. Suitable for printing with Phoenix Contact THERMOMARK ROLL, THERMOMARK ROLL X1 and THERMOMARK X1.2 printers, this sleeve marker offers a practical solution for organised cable identification in control panels and industrial wiring installations. Its operating temperature range is −55°C to +135°C.
| Specification | Description |
|---|---|
| Manufacturer | Phoenix Contact |
| Part Number | 0800394 |
| Product Designation | WMS 2,4 (30X4)RXL |
| Product Type | Heat-shrink cable marking sleeve |
| Description | White, printable heat-shrink sleeves for identifying wires and cables. Supplied on a perforated roll, the sleeves slide over conductors and shrink into place when heated. |
| Material | Halogen-free polyolefin |
| Colour | White |
| Marking Format | Unlabelled |
| Sleeve Length | 30 mm |
| Sleeve Width | 4 mm |
| Lettering Field | 30 × 4 mm |
| Suitable Cable Diameter | 0.8–2.4 mm |
| Mounting Method | Slide-on attachment, secured by heat shrinking |
| Supply Format | Roll |
| Number of Individual Labels | 5,000 |
| Labels per Row | 2 |
| Compatible Printing Equipment | THERMOMARK ROLL, THERMOMARK ROLL X1 and THERMOMARK X1.2 |
| Operating Temperature Range | −55°C to +135°C |
| Sleeve Characteristics | Remains flexible after shrinking and provides additional electrical insulation and mechanical protection for conductors |
| Wipe Resistance Standard | DIN EN 61010-1 (VDE 0411-1) |
| Tubing Standards | UL 224 and CSA C22.2 No. 198.1, with tubing ratings of 125°C and 600 V |
| Net Weight per Roll | 1,150 g |
What is this shrink sleeve used for?
This shrink sleeve is designed to identify wires and cables in electrical assemblies. Once labelled, it slides over the conductor and is secured by heat shrinking, helping to keep circuit identification clearly associated with the correct wire.
Which cable diameters can the sleeve accommodate?
The sleeve is specified for cable diameters from 0.8 mm to 2.4 mm. Check the outside diameter of the cable, including its insulation, when selecting a suitable marker.
What size is the labelling area?
The labelling field measures 30 mm long by 4 mm wide, providing space for wire references, circuit identifiers or other identification text.
Are the sleeves supplied pre-printed?
No. The sleeves are supplied white and unlabelled, allowing identification text to be added to suit the wiring layout or project.
Which printers are listed as compatible?
The manufacturer’s datasheet lists the THERMOMARK ROLL, THERMOMARK ROLL X1 and THERMOMARK X1.2 as compatible printers for labelling these sleeves.
How are the sleeves fitted to a conductor?
The conductor is threaded through the sleeve before the sleeve is heat-shrunk into place. Plan installation so that the sleeve can pass over the conductor end before any termination that would prevent it from sliding on.
What material are the sleeves made from?
The sleeves are made from halogen-free polyolefin. They remain flexible after shrinking and provide additional electrical insulation and mechanical protection for the conductor.
What is the operating temperature range?
The stated operating temperature range is -55 °C to +135 °C. This is the ambient operating range, not a specified heat-shrinking temperature.
How many markers are supplied on a roll?
The datasheet specifies 5,000 individual labels, arranged two per row. The sleeves are supplied in roll format for use with the listed compatible printers.
Are the sleeves perforated?
Yes. The sleeves are perforated to allow individual markers to be separated. The product features also describe arrangements with up to four markers per sleeve separated by perforations.
Where can these sleeves be used?
Typical applications include identifying conductors in control panels, electrical cabinets and machine wiring. Their slide-on, heat-shrink format is suited to installations where a close-fitting cable identifier is required.
What should be checked before selecting this sleeve?
Check the cable’s outside diameter, the space needed for identification text, printer compatibility and the application’s operating temperature. Also confirm that the sleeve can be fitted before the conductor is terminated.
- Identifying individual wires and cables in industrial control panels.
- Marking conductors in wiring harnesses for straightforward assembly and maintenance.
- Adding circuit references and terminal identifiers to cables in electrical cabinets.
- Colour-consistent wire identification using white sleeves printed with application-specific text.
- Securing cable markings with a heat-shrink fit on conductors measuring 0.8–2.4 mm in diameter.
- Providing additional electrical insulation and mechanical protection around marked conductors.
- Organising machine wiring with clearly labelled connections for easier fault tracing.
This content has been produced using multiple sources. EU Automation takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Delivery
- Logistic partners UPS, FedEx and DHL
- International delivery available
- Premium nine hour delivery service available to anywhere in Europe
- Same day dispatch from group stock
Warranty
All parts new or reconditioned are covered by EU Automation 12 month warranty
Returns
No hassle returns policy
Dedicated customer support team
Payment
Trade CreditWe understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
Payment optionsWe accept Bank transfers and the following methods of payment:
All transactions are handled securely by HSBC and HSBC Merchant Services. For more information, please visit our dedicated payments page.
Services
Sourcing your part
Global supplier of quality automation and control components
Service Exchange
Dispose of your old unit by exchanging it for a working part.
Repair
A comprehensive repair service for faulty equipment.
Customer reviews
steve
Daniel
Excellent customer service...
Alex Bailey is my main point of contact at EU Automation...he is extremely friendly, has exceptional customer service skills and always offers great pricing & lead times.
5 months ago
Jerry Schrink
Tom Higgins provided amazing service
Tom Higgins provided great prompt service. I contacted Tom by phone and within 10 minutes there was a quote in my in box. WOW Thank you Tom and Thank you EU Automation!
5 months ago
Paulo Pereira
Excellent service and communication…
Excellent service and communication from Alex Bailey. He truly goes above and beyond to ensure his clients are 100% satisfied. The entire process was seamless, and his attention to detail made a huge difference. Highly recommended for anyone looking for amazing service!
5 months ago
Gary
Tom Higgins did a great job at getting…
Tom Higgins did a great job at getting us the part we needed. He saw a concern with the part a verified before shipping.
5 months ago
Lessle Smith
Thomas Higgins has gone above and…
Thomas Higgins has gone above and beyond to make things happen for my facility. His customer service and knowledge were an asset in helping me with my order and the logistics challenges!
6 months ago
Be a Factory Hero.
Get parts fast.
You don’t need tights and a cape to be a hero.
Get parts fast and feel like a legend, just like Jeff.