DGSL-20-200-P1A

What does this component do in a pneumatic system?

It is a compact pneumatic mini slide that provides guided linear motion for moving a load along a straight path. It combines a pneumatic drive with an integrated guide so the slide can handle side loads better than a standard cylinder with an external guide.

Is the motion single-acting or double-acting?

It is double-acting, meaning compressed air is used to drive the slide in both directions for controlled extension and retraction.

What stroke length does it provide?

This version provides a 200 mm stroke (Festo DGSL-20-200-P1A).

What is the piston diameter?

The piston diameter is 25 mm.

What operating pressure range is supported?

The operating pressure range is 1 to 8 bar (0.1 to 0.8 MPa), depending on the application and required force.

What kind of guide does the slide use?

It uses a ball bearing cage guide, designed for smooth travel and good load handling in compact automation assemblies.

Can it be mounted in different orientations?

Yes. The mounting position is specified as any orientation, so it can be installed horizontally, vertically, or at an angle as required by the machine design.

What type of cushioning is included at the end positions?

It uses elastic cushioning rings/pads at both ends with a fixed stop to reduce impact at end-of-stroke.

What is the maximum speed of travel?

The specified maximum speed is up to 0.8 m/s, depending on load, pressure, and the overall pneumatic circuit.

How repeatable is the positioning?

Repetition accuracy is specified at ±0.01 mm under stated conditions, supporting consistent end-position operation in automation tasks.

What are the pneumatic connection ports?

The pneumatic connection is G1/8, suitable for common industrial pneumatic fittings and compact valve/manifold setups.

Does it support position sensing?

Yes. It is designed for position sensing using proximity sensors, enabling end-position detection and basic stroke monitoring.

What loads can it handle (forces and moments)?

It is rated for max forces Fy 4600 N and Fz 4600 N, and max torques Mx 90 Nm, My 80 Nm, and Mz 80 Nm, helping it manage side loads and moments typical of guided slide applications.

What forces can it generate at 6 bar?

The theoretical force at 6 bar is 295 N advancing and 247 N retracting. Actual usable force depends on friction, speed control, and the application setup.

What materials are used for the main components?

The housing and cover are wrought aluminum alloy, the piston rod is high-alloy stainless steel, and the seals are HNBR. The unit is also specified as free of copper and PTFE and is RoHS-compliant.