536330

What type of pneumatic component is this?

This is a compact double-acting pneumatic cylinder from the ADN series, designed for linear motion in compressed-air automation systems. It has a 63 mm piston diameter and a compact body style for installations where space is limited.

What is the piston diameter?

The piston diameter is 63 mm, making it suitable for applications requiring moderate to high linear force from a compact actuator.

What stroke lengths can this cylinder be configured with?

The datasheet specifies a stroke range from 1 mm to 400 mm, depending on the exact configuration of the ADN-63 compact cylinder.

Is this cylinder single-acting or double-acting?

It is a double-acting pneumatic cylinder, meaning compressed air is used to drive movement in both the extending and retracting directions.

What operating pressure range is suitable for this cylinder?

The specified operating pressure range is 0.6 bar to 10 bar, equivalent to 0.06 MPa to 1 MPa.

What pneumatic connection does this cylinder use?

The pneumatic connection is G1/8, a common threaded port size used on compact pneumatic actuators.

What type of cushioning does this cylinder have?

It is listed with elastic cushioning rings or pads at both ends, along with self-adjusting pneumatic end-position cushioning, helping to reduce impact at the end of travel.

Can this cylinder be mounted in any orientation?

Yes. The mounting position is specified as any, giving flexibility when integrating it into machinery or pneumatic assemblies.

What mounting methods are supported?

Mounting can be carried out using through-holes, internal threads, or suitable accessories, depending on the installation layout.

Can proximity sensors be used with this cylinder?

Yes. The cylinder is designed with position sensing for proximity sensors, allowing piston position detection in automated systems.

What operating medium should be used?

The recommended operating medium is compressed air in accordance with ISO 8573-1:2010 [7:4:4]. Operation with oil lubrication is possible, but if used, it must be continued for future operation.

What ambient temperature range is specified?

The general ambient temperature range is specified as -40 °C to 120 °C. For explosive atmospheres, the ambient range is listed as -20 °C to +60 °C.

What theoretical force can it produce at 6 bar?

At 6 bar, the theoretical retracting force is 1750 N, while the advancing force is specified from 1750 N to 1870 N, depending on the exact configuration.

Is this cylinder suitable for use in explosive atmospheres?

The datasheet lists ATEX-related classifications, including Zone 1, Zone 2, Zone 21 and Zone 22 suitability, with gas category II 2G and dust category II 2D. Users should check the full machine environment and compliance requirements before selection.

What materials are used in its construction?

Key materials include a wrought aluminium alloy cover, a smooth-anodised wrought aluminium alloy cylinder barrel, a high-alloy steel piston rod and steel flange screws.

Is the cylinder RoHS-compliant?

Yes. The material note states that it is RoHS-compliant.

What corrosion resistance classes are referenced?

The datasheet references corrosion resistance classifications including CRC 0, CRC 2 and CRC 3, covering no corrosion stress through to high corrosion stress depending on configuration.

Is it suitable for lithium-ion battery production environments?

The datasheet states suitability for the production of Li-ion batteries, with restrictions on metals containing more than 1% copper, zinc or nickel by mass, subject to the listed exceptions.

What standards does this cylinder conform to?

The cylinder conforms to ISO 21287, a standard associated with compact pneumatic cylinders.

What applications is this compact cylinder commonly used for?

It is commonly suited to automated pushing, lifting, clamping, indexing, positioning and transfer tasks where a compact pneumatic actuator with a 63 mm bore is required.