8BVF0440H000.001-2

What is the purpose of this line filter?

The line filter is designed to be used with ACOPOSmulti 8BVP power supply modules. It helps in maintaining compliance with EMC limit values by filtering out unwanted electrical noise and disturbances from the power supply, ensuring the smooth operation of connected drive systems.

Can this line filter be used with power supply modules from other manufacturers?

No, this line filter is specifically designed for use with B&R ACOPOSmulti power supply modules and should not be used with power supply modules from other manufacturers. Using it with other systems may lead to incompatibility issues or damage to the filter or the connected equipment.

What are the electrical characteristics of this line filter?

The line filter has a discharge capacitance of 14.1 µF and is rated for a 480 V, 3-phase supply with a current rating of 45 A. It is designed to work within a wide mains input voltage range and is optimally suited for ACOPOSmulti 8BVP power supply modules.

What are the installation requirements for this line filter?

The line filter requires a clearance of at least 60 mm above, below, and in front of the module to ensure sufficient air circulation. It can be mounted in various orientations, including hanging vertically or lying horizontally, but not standing horizontally.

What are the permissible operating conditions for this line filter?

The line filter can operate nominally from 5°C to 40°C and can be stored from -25°C to 55°C. It can handle relative humidity during operation from 5 to 85% and storage humidity from 5 to 95%. It is also designed to operate at elevations from 0 to 500 m above sea level nominally, with a maximum of 4000 m.

What certifications does this line filter hold?

The line filter is certified with CE, KC, and UL/cULus E225616 for power conversion equipment, ensuring it meets the necessary safety and performance standards for use in various regions.

How should the protective ground connection be established?

The protective ground conductor should be secured to the M5 threaded bolt provided for this purpose using a cable lug. It is crucial to ensure that the housing of the line filter is properly connected to ground potential (PE rail) before switching on the power supply.

Are there any specific wiring instructions for this line filter?

Yes, the line filter must be wired according to the pinout overview provided in the technical documentation. It is important to note that the position of the protective ground connection on connectors X1 and X2 differs from that on connector X5A of inverter modules and power supply modules.

What is the weight and dimensions of this line filter?

The line filter has a width of 135 mm, a height of 378 mm, and a depth of 212 mm. It weighs approximately 11.6 kg.

Can this line filter be used in environments with non-conductive pollution?

Yes, the line filter is rated for Pollution Degree 2 according to EN 61800-5-1, which means it is suitable for environments with non-conductive pollution.