1208199

What type of device is this?

This is an electro-pneumatic stripping and crimping device for processing insulated ferrules. It strips the conductor and crimps the ferrule in a single operation, helping produce consistent terminations for control panel and industrial wiring applications.

What ferrule sizes can it process?

The device is designed for insulated ferrules with a cross-section range from 0.25 mm² to 4.0 mm². The standard configuration includes conversion kits for 0.5 mm² to 1.5 mm² ferrules with sleeve lengths from 6 mm to 12 mm.

What input voltage does the unit require?

The Phoenix Contact 1208199 operates with a 100–240 V input voltage, making it suitable for use across a range of industrial electrical environments.

What air pressure is required for operation?

The specified operating pressure range is 5 bar to 6 bar. Air consumption is listed as approximately 1.2 litres per compression.

What crimp profile does it produce?

The device produces a trapezoidal compression, which is commonly used for reliable ferrule terminations in industrial wiring.

How many conductors can it process per hour?

The unit is designed for bulk processing and can process up to 1,000 conductors per hour, depending on the application and operator workflow.

Which standard is it designed to meet for ferrule processing?

It is intended for insulated ferrules according to DIN 46228-4:1990-09. The pull-out forces are stated to meet the requirements of IEC/EN 60999 and IEC/EN 60947.

What are the main dimensions of the machine?

The listed dimensions are 550 mm in length, 250 mm in width and 412 mm in height. The conductor entry opening diameter is 6 mm.

How much does the unit weigh?

The device has a listed weight of approximately 29 kg in the technical data, with catalogue weight entries also showing around 32.5 kg to 34 kg excluding packing depending on the catalogue version.

What is the maximum stripping length?

The maximum stripping length is 14.5 mm. The minimum conductor insertion length is listed as 32 mm.

Does it include a quantity counter?

Yes. The unit includes a quantity counter, which can be useful for batch processing and production monitoring.

Can the cross-section be changed quickly?

Yes. One of the stated advantages of the device is quick cross-section changeover without additional adjustment, helping reduce set-up time during ferrule processing.

What accessories are commonly associated with this device?

Associated accessories include conversion kits, crimping jaws, square crimping jaws, replacement blades, sleeve receivers, feeder bowls, separating plates, sleeve stops, start buttons and mains fuses for CF 1000 series stripping and crimping equipment.

What replacement blade is used for smaller conductor sizes?

For 0.25 mm² to 2.5 mm² processing, the listed V-shaped replacement blade is CF 1000 EM, Phoenix Contact item 1205215.

What replacement blade is used for 4.0 mm² processing?

For 4.0 mm² processing, the listed V-shaped replacement blade is CF 1000 EM4,0, Phoenix Contact item 1212663.

What type of mains fuse is listed for the unit?

The listed mains fuse is a 20 x 5 mm slow-blow fuse rated at 2 A up to 250 V. One associated replacement fuse reference is FUSE SB 2.0A/250V, item 1212685.

What is the country of origin?

The country of origin is listed as Germany.

What is the GTIN for this product?

The GTIN listed for this Phoenix Contact stripping and crimping device is 4046356011341.