100003136

What type of device is this?

This is a three-wire pressure transmitter designed to convert relative pressure measurements into a proportional analogue voltage signal.

What pressure range does the transmitter measure?

The transmitter measures relative pressure from 0 to 60 psi, equivalent to approximately 0 to 4.14 bar or 0 to 0.41 MPa.

What analogue output does it provide?

Turck 100003136 provides a 0 to 5 V analogue output for connection to a compatible controller, monitoring device or measurement system.

What operating voltage is required?

The specified operating voltage range is 7 to 33 V DC, with current consumption of no more than 7 mA.

Which process connection is fitted?

The pressure transmitter has a 1/4-inch NPT-18 male process connection made from AISI 316L stainless steel.

What electrical connection does the transmitter use?

It uses an M12 × 1 connector, providing a compact plug-in connection for industrial installations.

How quickly does the transmitter respond to pressure changes?

The specified response time is less than 2 ms, with a typical response of 1 ms.

What are its pressure overload limits?

The admissible overpressure is up to 20 bar, while the stated burst pressure is at least 40 bar.

What environmental protection rating does it have?

The device is rated IP67 and protection class III, making it suitable for demanding industrial environments when correctly installed with compatible connections.

What temperature ranges can it accommodate?

The permitted medium temperature range is -40 to +135 °C. Its ambient operating range is -30 to +85 °C, while the storage range is -50 to +100 °C.

What measurement accuracy does it offer?

The linearity, hysteresis and repeatability accuracy is typically ±0.3% of full scale, with a specified maximum of ±0.5% of full scale. Resolution is better than ±0.1% of full scale.

Is the electrical input protected against connection faults?

Yes. The transmitter includes short-circuit and reverse-polarity protection.

What materials are used in its construction?

The housing combines AISI 316L stainless steel with glass-fibre-reinforced polyarylamide. The process connection is AISI 316L stainless steel, and the pressure transducer is AISI 430 stainless steel.

What load requirements apply to the voltage output?

The connected input should have a resistance greater than 10 kΩ, while the capacitive load should not exceed 100 nF.

What applications is this pressure transmitter suited to?

Its compact design, fast response and 0 to 5 V output make it suitable for relative-pressure monitoring in pneumatic systems, industrial machinery, process equipment and automated measurement installations.