VH362AWKGL

What type of device is this?

It is a heavy-duty, single-throw safety switch designed to provide a visible means of disconnecting electrical equipment from its power source.

Is this a fused or non-fused switch?

The VH362AWKGL is a fusible disconnect switch. It accepts compatible H, K, R or J-type fuses, subject to the installation requirements and required short-circuit rating.

What are the electrical ratings?

The switch is rated for 60 A and up to 600 V AC/DC.

How many poles does the switch have?

It has three poles and a three-wire configuration, making it suitable for applicable three-phase installations.

What enclosure rating does it have?

The unit has a NEMA Type 12 galvannealed steel enclosure. This enclosure type is generally intended for indoor industrial environments where protection from dust, dirt and dripping non-corrosive liquids is required.

Does the enclosure include a viewing window?

Yes. The enclosure incorporates a viewing window, allowing the internal switch position or fuse area to be inspected without immediately opening the enclosure.

What is the short-circuit current rating?

The rating is 10 kA when using H, K, J or R fuses without fuse-rejection clips. It can reach 200 kA with J fuses, or with R fuses when the appropriate fuse-rejection clips are fitted.

What conductor sizes can be connected?

The lug connections accept copper conductors from AWG 14 to AWG 3 and aluminium conductors from AWG 12 to AWG 3.

How is the unit mounted?

It is designed for surface mounting, with lug-type electrical connections.

What are the approximate product dimensions?

The switch measures approximately 420.12 mm high, 226.57 mm wide and 181.97 mm deep.

How much does the unit weigh?

The net product weight is approximately 9 kg.

Are grounding lugs included?

Yes. Grounding provisions are factory installed as part of the VH362AWKGL configuration.

Is a neutral supplied as standard?

A neutral is not factory installed. A compatible field-installed neutral kit can be added when required by the electrical system.

Is it suitable for service-entrance applications?

The product is identified as suitable for service-entrance use in the United States and Mexico when installed in accordance with the applicable electrical requirements.

Does the product carry recognised certification?

Yes. It is UL listed under file E2875.

What applications is this switch commonly used for?

Typical applications include isolating industrial machinery, motors, production equipment and other three-phase electrical loads that operate within the switch's voltage, current and enclosure ratings.

Can it be used with motors?

Yes. The switch has motor horsepower ratings for applicable three-phase AC and DC motor circuits. The selected configuration must match the motor voltage, full-load current, fuse type and relevant electrical installation requirements.

What tightening torque should be used for the terminals?

The specified torque depends on conductor size. Values range from 40 to 50 lbf·in, equivalent to approximately 4.52 to 5.65 N·m. The correct value should be selected for the conductor gauge being installed.