steve
Got hold of Sime for a Carrier card for…
Got hold of Sime for a Carrier card for a chiller. Machine down in a factory. Received the new card in express time machine and plant now up and running fantastic service form Sime
1 month ago
1FK2204-5AF01-0MA0
Siemens 1FK2204-5AF01-0MA0 available at EU Automation. Get in touch today for a quick price.
Based on over 4900 reviews
Full 12-month warranty
Available for dispatch immediately
We deliver worldwide
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
The Siemens 1FK2204-5AF01-0MA0 is a compact SIMOTICS S-1FK2 permanent-magnet synchronous servo motor designed for precise motion applications. It delivers 0.75 kW rated power, 2.40 Nm rated torque and a rated speed of 3,000 rpm, with maximum performance of 7.10 Nm and 7,500 rpm. Natural cooling and an IP65 enclosure provide dependable operation in demanding industrial environments.
An AM22DQC absolute encoder with 22-bit resolution and 12-bit multiturn capability supports accurate positioning and repeatable motion. The motor features a one-cable connection for SINAMICS S210 systems, an M17 connector, IM B5 mounting arrangement and a plain 19 mm shaft. Its compact 80 mm flange and 126 mm overall length make it suitable for machinery where installation space is limited.
An AM22DQC absolute encoder with 22-bit resolution and 12-bit multiturn capability supports accurate positioning and repeatable motion. The motor features a one-cable connection for SINAMICS S210 systems, an M17 connector, IM B5 mounting arrangement and a plain 19 mm shaft. Its compact 80 mm flange and 126 mm overall length make it suitable for machinery where installation space is limited.
| Specification | Description |
|---|---|
| Manufacturer | Siemens |
| Part number | 1FK2204-5AF01-0MA0 |
| Product range | SIMOTICS S-1FK2 |
| Product type | Compact permanent-magnet synchronous motor |
| Cooling method | Natural cooling |
| Degree of protection | IP65 |
| Rated power | 0.75 kW |
| Rated speed | 3,000 rpm |
| Maximum speed | 7,500 rpm |
| Rated torque | 2.40 Nm |
| Static torque | 2.40 Nm |
| Maximum torque | 7.10 Nm |
| Rated current | 2.3 A |
| Static current | 2.3 A |
| Maximum current | 7.1 A |
| Compatible drive system | SINAMICS S210, 3-phase 400 V |
| Encoder | AM22DQC absolute encoder, 22-bit single-turn resolution with 12-bit multiturn capability |
| Connection type | One Cable Connection (OCC) for SINAMICS S210 |
| Connector size | M17 |
| Mounting design | IM B5, suitable for IM V1 and IM V3 orientations |
| Vibration severity grade | Grade A |
| Shaft height | 40 mm |
| Flange size | 80 mm |
| Centring ring diameter | 70 mm |
| Mounting hole circle | 90 mm |
| Mounting hole diameter | 6.5 mm |
| Overall length | 126 mm |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Shaft end | Plain shaft |
| Flange diagonal | 105 mm |
| Rotor moment of inertia | 1.2300 kgcm² |
| Weight | 2.9 kg |
| Housing colour | Anthracite, similar to RAL 7016 |
What type of motor is this component?
It is a compact SIMOTICS S-1FK2 permanent-magnet synchronous motor designed for precise motion-control applications. The motor uses natural cooling and has an IP65 enclosure rating.
What are the rated output and operating speed?
When paired with a SINAMICS S210 3 AC 400 V drive, the motor has a rated output of 0.75 kW and a rated speed of 3,000 rpm.
What torque can the motor produce?
The motor provides a rated and static torque of 2.40 Nm. Its maximum torque is 7.10 Nm, enabling it to accommodate short periods of increased mechanical demand.
What is the maximum motor speed?
The maximum specified speed is 7,500 rpm. The application must be configured within the stated speed, torque and current limits.
Which encoder is fitted to the motor?
The motor incorporates an AM22DQC absolute encoder with 22-bit resolution and 12-bit multiturn position detection. This enables detailed position feedback across multiple shaft revolutions.
Which drive platform is this motor designed to work with?
Siemens 1FK2204-5AF01-0MA0 is configured for operation with the SINAMICS S210 drive platform at 3 AC 400 V.
What electrical connection does the motor use?
It uses a one-cable connection, identified as OCC, for the SINAMICS S210 system. The specified connector size is M17.
What does the IP65 rating indicate?
IP65 indicates that the motor enclosure is dust-tight and protected against water jets. The complete installation must preserve the required enclosure integrity.
What are the principal mounting dimensions?
The motor has an 80 mm flange, a 70 mm centring ring, a 90 mm mounting-hole circle and 6.5 mm fixing holes. Its overall length is 126 mm, and the flange diagonal measures 105 mm.
What shaft configuration is provided?
The motor has a plain shaft with a diameter of 19 mm and a shaft extension length of 40 mm. The shaft height is 40 mm.
Which mounting arrangements can be used?
The specified construction is IM B5, with IM V1 and IM V3 mounting orientations also listed. Machine geometry and load arrangement should be checked before installation.
What are the motor's rated and maximum current values?
The rated and static current is 2.3 A, while the maximum current is 7.1 A. Drive parameters should be matched to these motor characteristics.
How much does the motor weigh?
The motor weighs approximately 2.9 kg. This figure can assist with machine layout, mounting calculations and handling arrangements.
How does the motor dissipate heat?
The motor uses natural cooling rather than a separately driven fan. Adequate space and suitable installation conditions should therefore be considered when integrating it into machinery.
What is the rotor moment of inertia?
The specified rotor moment of inertia is 1.2300 kgcm². This value is relevant when assessing acceleration, deceleration and dynamic load behaviour.
- Precision positioning in automated machinery
- Servo-driven packaging and labelling equipment
- Pick-and-place systems
- Robotic handling and assembly applications
- CNC machine tool axis control
- Conveyor indexing and synchronisation
- Printing and converting machinery
- Material handling and sorting systems
- High-speed production and processing equipment
- Motion control applications using SINAMICS S210 drives
- Applications requiring absolute multiturn position feedback
- Compact machine designs requiring an IP65-rated servo motor
This content has been produced using multiple sources. EU Automation takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Delivery
- Logistic partners UPS, FedEx and DHL
- International delivery available
- Premium nine hour delivery service available to anywhere in Europe
- Same day dispatch from group stock
Warranty
All parts new or reconditioned are covered by EU Automation 12 month warranty
Returns
No hassle returns policy
Dedicated customer support team
Payment
Trade CreditWe understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
Payment optionsWe accept Bank transfers and the following methods of payment:
All transactions are handled securely by HSBC and HSBC Merchant Services. For more information, please visit our dedicated payments page.
Services
Sourcing your part
Pembekal global untuk komponen automasi dan kawalan berkualiti
Service Exchange
Dispose of your old unit by exchanging it for a working part.
Repair
A comprehensive repair service for faulty equipment.
Customer reviews
steve
Daniel
Excellent customer service...
Alex Bailey is my main point of contact at EU Automation...he is extremely friendly, has exceptional customer service skills and always offers great pricing & lead times.
3 months ago
Jerry Schrink
Tom Higgins provided amazing service
Tom Higgins provided great prompt service. I contacted Tom by phone and within 10 minutes there was a quote in my in box. WOW Thank you Tom and Thank you EU Automation!
3 months ago
Paulo Pereira
Excellent service and communication…
Excellent service and communication from Alex Bailey. He truly goes above and beyond to ensure his clients are 100% satisfied. The entire process was seamless, and his attention to detail made a huge difference. Highly recommended for anyone looking for amazing service!
3 months ago
Gary
Tom Higgins did a great job at getting…
Tom Higgins did a great job at getting us the part we needed. He saw a concern with the part a verified before shipping.
3 months ago
Lessle Smith
Thomas Higgins has gone above and…
Thomas Higgins has gone above and beyond to make things happen for my facility. His customer service and knowledge were an asset in helping me with my order and the logistics challenges!
4 months ago
Our world, made possible by manufacturing. Manufacturing made possible by EU Automation.
Discover how we do our part to keep your production lines moving.