3025046

What type of component is this?

This is a single-level fuse modular terminal block designed to combine conductor termination and circuit fuse protection within a DIN rail assembly. It uses push-in connections and incorporates red LED status indication.

Which fuse size is compatible with this terminal block?

The terminal block accepts G-type cylindrical fuses measuring 5 x 20 mm. It is suitable for glass, ceramic and comparable fuse constructions in this format.

What is the maximum current rating?

The nominal and maximum load current is 10 A. The actual permissible circuit current is determined by the rating and characteristics of the installed fuse.

What is the nominal voltage rating?

The terminal block has a nominal voltage rating of 1000 V under IEC data. Its UL and cUL recognition data specifies a nominal voltage of 600 V.

What voltage range is used by the LED indicator?

The integrated red LED is designed for a voltage range of 12 V AC/DC to 30 V AC/DC, with an LED current range of 1 mA to 2.5 mA.

Which conductor sizes can be connected?

Solid and flexible conductors from 0.5 mm² to 10 mm² can be connected, corresponding to AWG 20 to AWG 8. Flexible conductors fitted with ferrules are accepted up to 6 mm², depending on the ferrule configuration.

What connection method does it use?

Phoenix Contact 3025046 uses push-in connection technology. This enables prepared solid conductors and conductors with suitable ferrules to be inserted directly into the terminal point.

What conductor stripping length is required?

The specified stripping length is between 10 mm and 12 mm. Correct preparation helps the conductor seat fully within the push-in connection.

Which DIN rails are suitable for mounting?

The terminal block mounts on NS 35/7.5 and NS 35/15 DIN rails. These are standard 35 mm rail profiles commonly used in control cabinets and electrical enclosures.

What are the component's dimensions?

The unit is 12.3 mm wide and 77.7 mm long. Its installed height is 51.2 mm on an NS 35/7.5 rail and 58.7 mm on an NS 35/15 rail.

How many levels and connection points does it have?

This is a single-level terminal block with two connection points and a nominal conductor cross-section of 6 mm².

What operating temperature range is specified?

The specified ambient operating temperature range is -60°C to 85°C. Assembly and actuation are specified for ambient temperatures from -5°C to 70°C.

Which electrical standard applies to this terminal block?

The terminal block is specified in accordance with IEC 60947-7-3, the standard covering fuse terminal blocks. It also carries UL Recognized, cUL Recognized, cULus Recognized and EAC approvals.

What insulation and flammability properties does it have?

The housing uses polyamide insulating material and carries a UL 94 V-0 flammability classification. It is assigned to insulation material group I, pollution degree 3 and overvoltage category III.

What accessories can be used with this terminal block?

Compatible accessory categories include 35 mm DIN rails, end clamps, plug-in bridges, terminal markers, test plugs, test adapters, warning labels and suitable actuation tools. Accessory selection should be checked against the required pitch and mounting arrangement.

What is the rated surge voltage?

The rated surge voltage is 6 kV.

How much does one terminal block weigh?

The stated weight is approximately 28 g per piece, excluding packaging.