ADNGF-40-40-P-A

What type of component is this?

It is a compact pneumatic cylinder designed for linear motion using compressed air. The ADNGF-40-40-P-A is a double-acting cylinder with a guided piston rod arrangement, making it suitable for applications where controlled extension and retraction are required in a compact installation space.

What is the stroke length?

The cylinder has a stroke length of 40 mm, meaning the piston rod travels 40 mm from its fully retracted position to its fully extended position.

What is the piston diameter?

The piston diameter is 40 mm. This bore size contributes to the cylinder’s output force and overall pneumatic performance.

Is this a single-acting or double-acting cylinder?

This is a double-acting pneumatic cylinder. Air pressure is used to move the piston in both directions, giving controlled advancing and retracting movement.

What operating pressure range does it use?

The operating pressure range is 1 bar to 10 bar, equivalent to 0.1 MPa to 1 MPa.

What pneumatic port size does it have?

The pneumatic connection size is G1/8, which is commonly used for compact pneumatic cylinders and associated fittings.

What kind of cushioning is included?

The cylinder uses elastic cushioning rings or pads at both end positions. These help reduce impact as the piston reaches the end of its travel.

Can it be mounted in any orientation?

Yes, the mounting position is optional, allowing the cylinder to be installed in different orientations depending on the machine layout.

Does it allow position detection?

Yes, position detection is possible using a proximity sensor. This allows the cylinder position to be monitored as part of an automated pneumatic system.

What is the function of the guide rod and yoke?

The guide rod with yoke provides protection against torsion. This helps prevent unwanted twisting of the piston rod and improves guidance during linear movement.

What force can it generate at 6 bar?

At 6 bar, the theoretical force is approximately 754 N on the advancing stroke and 686 N on the retracting stroke.

What temperature range is it suitable for?

The ambient temperature range is -20 °C to 80 °C, making it suitable for many general industrial pneumatic environments.

What compressed air quality is required?

The cylinder is intended for compressed air in accordance with ISO 8573-1:2010 class [7:4:4]. Lubricated operation is possible, but if lubrication is introduced it should continue thereafter.

What materials are used in its construction?

Key materials include anodised wrought aluminium alloy for the cover, end plate and cylinder barrel, high-alloy steel for the piston rod, steel flange screws and TPE-U (PUR) seals.

Is it RoHS compliant?

Yes, the material information states that the part is RoHS compliant.

What is its corrosion resistance classification?

It has corrosion resistance class CRC 2, which indicates suitability for environments with moderate corrosion stress.

What is the approximate product weight?

The product weight is approximately 616 g. The moving mass is approximately 241 g.

Which standard is the design based on?

The compact cylinder design is based on ISO 21287, a standard commonly associated with compact pneumatic cylinders.