1045655

What type of device is this?

This is an S3000 PROFINET IO Professional industrial laser scanner designed for indoor machine and area monitoring. It uses configurable protective and warning fields to detect objects within a defined scanning zone.

What is the protective field range?

The protective field has a maximum range of 7 metres. The warning field and distance measurement range extend up to 49 metres, or 20 metres for targets with 20% remission.

Which industrial network does the scanner use?

The scanner communicates through PROFINET PROFIsafe and operates exclusively through a compatible networked control system. It does not have local inputs or outputs.

How many monitoring fields can be configured?

The unit provides eight dual field sets, 16 individual fields and 16 monitoring cases. It can monitor two protective fields simultaneously.

What is the scanning angle and configurable resolution?

The scanner covers a 190-degree scanning angle. Its configurable resolution options are 30 mm, 40 mm, 50 mm, 70 mm and 150 mm, with an angular resolution of either 0.25 or 0.5 degrees depending on the selected range and resolution.

What is the device response time?

The specified response time is 60 milliseconds. The actual response behaviour can vary according to the selected resolution, field range, output type and multiple-evaluation setting.

What electrical supply does the unit require?

SICK 1045655 requires a nominal 24 V DC supply and accepts an operating range of 16.8 to 28.8 V DC. Current consumption is approximately 0.8 A at 24 V DC without an output load.

What are the environmental ratings?

The enclosure is rated IP65 in accordance with EN 60529. The operating ambient temperature range is -10°C to +50°C, while the specified storage temperature range is -25°C to +50°C.

What are the dimensions and weight?

The scanner measures approximately 155 mm wide, 185 mm high and 160 mm deep. It weighs around 3.3 kg and has a yellow, die-cast aluminium housing.

Does the unit include a system connector?

This version is supplied as a sensor without a system connector. A suitable S3000 PROFINET IO system connector must therefore be selected separately for the intended installation.

Which interfaces are available for configuration and measured data?

The device has an RS-232 interface for configuration and diagnostics, while measured data can be provided through RS-422. Its network connection uses two push-pull RJ-45 sockets for copper cabling.

Which functional protection classifications apply?

The scanner is classified as Type 3 according to IEC 61496, SIL 2 according to IEC 61508, Category 3 and Performance Level d according to EN ISO 13849. Its stated PFHD value is 8.0 × 10^-8 per hour.

What mounting options are suitable for this scanner?

The scanner can be installed on walls, machines or floors using compatible fixed, adjustable or heavy-duty mounting brackets. The selected bracket should provide the required alignment and protection for the application.

Is this model intended for indoor or outdoor installation?

This model is specified for indoor applications. Installation conditions should remain within its IP65 enclosure rating and stated operating temperature range.