1FL6044-1AF61-2LB1

What type of component is this?

This is a SIMOTICS S-1FL6 permanent-magnet synchronous servo motor designed for precise motion control in industrial automation applications.

What is the rated power of this servo motor?

The motor has a rated power of 0.75 kW, equivalent to approximately 1.02 hp.

What is the rated speed?

The rated speed is 3,000 rpm, with a maximum speed of 4,000 rpm.

What torque values does this motor provide?

It provides a rated torque of 2.39 Nm, a static torque of 3.50 Nm, and a maximum torque of 7.20 Nm.

Does this motor include a holding brake?

Yes. The motor includes a holding brake with a holding torque of 3.50 Nm, a rated voltage of 24 V DC ±10 %, an opening time of 60 ms, and a closing time of 45 ms.

What type of encoder is fitted?

The motor is fitted with an absolute encoder rated at 20 bit single-turn plus 12 bit multi-turn, enabling accurate position feedback.

What is the motor inertia classification?

This model is classified as a high-inertia motor, making it suitable for applications where stable motion and load matching are important.

What shaft configuration does it use?

The motor uses a shaft end with a feather key, which helps provide a secure mechanical connection to compatible couplings, gearboxes or driven equipment.

What is the ingress protection rating?

The motor has an IP65 degree of protection, meaning it is protected against dust ingress and low-pressure water jets when correctly installed.

How is the motor cooled?

The motor uses natural cooling, so it does not rely on an integral fan for normal heat dissipation.

What are the operating ambient conditions?

The specified operating ambient temperature range is 0 to 40 °C, with relative humidity up to 90 % RH maximum, non-condensing at 30 °C.

What mounting arrangement is specified?

The motor is designed according to Code I with IM B5 mounting, including IM V1 and IM V3 mounting orientations.

What type of electrical connection does it use?

It uses an angular, rotatable connector, allowing the cable outlet direction to be adjusted during installation.

What is the approximate net weight?

The net weight is approximately 6.30 kg, although plate values and published data can vary slightly.

Which drive families is it commonly associated with?

This SIMOTICS S-1FL6 servo motor is commonly associated with SINAMICS V70 and V90 drive systems, subject to correct configuration and matching electrical ratings.