1844333 Phoenix Contact

What type of component is this?

This is a PCB header from the COMBICON MC 1,5 range, designed to provide a board-mounted connection point for compatible plug-in terminal block connectors.

What is the pitch of the connector?

The connector has a 3.5 mm pitch, which is the centre-to-centre spacing between adjacent positions.

How many positions does it have?

It has 14 positions in a single-row layout, with 14 connections and 14 potentials.

What current and voltage ratings apply?

The header is rated at 8 A nominal current. Its rated voltage is 160 V for overvoltage categories III/2 and III/3, and 250 V for category II/2.

What PCB mounting method is used?

This component is intended for wave soldering onto a printed circuit board, using a linear pin layout.

What are the main dimensions?

The header has a width of 50.4 mm, height of 10.65 mm, length of 9.2 mm, installed height of 7.25 mm, and solder pin length of 3.4 mm.

What PCB hole size is required?

The specified PCB hole diameter is 1.2 mm, with 0.8 x 0.8 mm pin dimensions.

What material is used for the housing?

The housing is made from green PBT insulating material, classified as material group IIIa, with a UL 94 V0 flammability rating.

What contact plating is used?

The contacts are made from copper alloy with tin-plated contact and soldering surfaces over a nickel middle layer.

What operating temperature range is specified?

The operating temperature range is -40 °C to 100 °C, dependent on the applicable derating curve.

Is it suitable for compact control and interface boards?

Yes. Its 3.5 mm pitch, single-row 14-position format and PCB header design make it suitable for compact industrial electronics, control boards and signal connection applications.

What environmental compliance information is listed?

The component fulfils EU RoHS substance requirements with no exemptions, has no hazardous substances above China RoHS limits, and contains no REACH candidate substance above 0.1 wt%.