steve
Got hold of Sime for a Carrier card for…
Got hold of Sime for a Carrier card for a chiller. Machine down in a factory. Received the new card in express time machine and plant now up and running fantastic service form Sime
3 weeks ago
XBTZ9711
Schneider XBTZ9711 available at EU Automation. Get in touch today for a quick price.
Based on over 4900 reviews
Full 12-month warranty
Available for dispatch immediately
We deliver worldwide
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
Schneider XBTZ9711 is a Magelis/Harmony XBT connection cable designed for Modbus serial communication between compatible XBT terminals and automation equipment such as Modicon Momentum platforms. The cable is 2.5 metres long and features one male RJ45 connector and one male 25-pin SUB-D connector, providing an RS232 physical interface for dependable point-to-point communication in industrial HMI applications. As a Schneider connection accessory, it is suitable for use with selected Magelis XBT N, R, RT, GT, GK and GTW operator interface ranges where a dedicated Modbus serial link is required. Its pre-terminated design helps simplify panel integration and replacement in control systems using compatible Schneider HMI and controller hardware.
| Specification | Description |
|---|---|
| Part Number | XBTZ9711 |
| Manufacturer | Schneider |
| Product Type | Connecting cable |
| Product Range | Harmony XBT / Magelis XBT |
| Accessory Category | Connection accessory |
| Accessory Designation | Modbus serial link cable |
| Intended Use | Designed to connect compatible XBT terminals with supported Modicon Momentum automation equipment |
| Cable Length | 2.5 m |
| Connector A | 1 x male RJ45 connector |
| Connector B | 1 x male SUB-D 25 connector |
| Communication Protocol | Modbus |
| Physical Interface | RS232 |
| Compatible Terminals | XBTN410, XBTN401, XBTNU400, XBTR410, XBTR411, XBTGTW, XBTGT and XBTGK series |
| Compatible Platforms | Harmony HMI GTO and Modicon Momentum automation platform |
| Product Category | HMIs and Displays accessory |
| Product Family | Magelis XBT N, R, RT |
| Net Weight | 0.21 kg |
| Package Quantity | 1 unit |
| Package Dimensions | 3 cm x 15 cm x 15 cm |
| Package Weight | 220 g |
| Country of Origin | France |
| Sustainability Status | Green Premium product |
| RoHS Status | Pro-active compliance, outside EU RoHS legal scope |
| REACh Status | Free of SVHC according to listed product data |
| Mercury Content | Mercury free |
| WEEE Handling | To be disposed of through specific waste collection channels in European Union markets |
What is this cable used for?
It is a Modbus serial link connecting cable used to link compatible Magelis or Harmony XBT HMI terminals with compatible automation platforms, including Modicon Momentum applications.
What connectors are fitted to this cable?
The cable has one male RJ45 connector and one male SUB-D 25 connector, making it suitable for equipment combinations that require this specific RS232 Modbus connection format.
How long is the cable?
The cable length is 2.5 metres, which is approximately 8.20 feet.
Which communication protocol does it use?
This cable is designed for Modbus serial communication.
What physical communication interface is used?
The physical interface is RS232, so it should be matched with devices requiring an RS232 Modbus serial link.
Which HMI ranges is it intended for?
It is intended for compatible XBT terminals, including selected Magelis XBT and Harmony XBT units such as XBTN, XBTR, XBTNU, XBTGT, XBTGTW and XBTGK ranges.
Can it be used with Modicon Momentum equipment?
Yes, the cable is listed for use with the Modicon Momentum automation platform where the correct RJ45 to SUB-D 25 RS232 Modbus connection is required.
What is the approximate weight of the cable?
The net weight is approximately 0.21 kg, or 0.46 lb.
What are the package dimensions for a single unit?
A single unit is typically packed as one piece with approximate dimensions of 3 cm high, 15 cm wide and 15 cm long.
Is this a power cable or a communication cable?
It is a communication cable, specifically a Modbus serial link cable, rather than a power cable.
What should be checked before fitting this cable?
Check that both connected devices require an RS232 Modbus link and that the connector arrangement matches one male RJ45 end and one male SUB-D 25 end.
Does this cable fall within environmental compliance information?
Yes, XBTZ9711 is listed with environmental compliance information including Green Premium status, mercury-free status and EU RoHS-related declaration details.
- Connecting Magelis XBT operator terminals to Modicon Momentum automation platforms
- Establishing RS232 Modbus communication between compatible HMI panels and controllers
- Linking Harmony HMI GTO units with supported automation equipment
- Integrating XBT N, XBT R and related Magelis terminal ranges into control systems
- Providing a 2.5 m connection between RJ45 and SUB-D 25 interfaces
- Supporting panel-mounted HMI installations where a dedicated Modbus serial cable is required
- Replacing damaged or missing communication leads in existing Schneider HMI configurations
- Use in industrial machine control panels, production lines and automation cabinets
- Connecting compatible XBT terminals during system commissioning or equipment upgrades
- Maintaining communication between operator displays and PLC-based control equipment
This content has been produced using multiple sources. EU Automation takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Delivery
- Logistic partners UPS, FedEx and DHL
- International delivery available
- Premium nine hour delivery service available to anywhere in Europe
- Same day dispatch from group stock
Warranty
All parts new or reconditioned are covered by EU Automation 12 month warranty
Returns
No hassle returns policy
Dedicated customer support team
Payment
Trade CreditWe understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
Payment optionsWe accept Bank transfers and the following methods of payment:
All transactions are handled securely by HSBC and HSBC Merchant Services. For more information, please visit our dedicated payments page.
Services
Sourcing your part
Global supplier of quality automation and control components
Service Exchange
Dispose of your old unit by exchanging it for a working part.
Repair
A comprehensive repair service for faulty equipment.
Customer reviews
steve
Daniel
Excellent customer service...
Alex Bailey is my main point of contact at EU Automation...he is extremely friendly, has exceptional customer service skills and always offers great pricing & lead times.
2 months ago
Jerry Schrink
Tom Higgins provided amazing service
Tom Higgins provided great prompt service. I contacted Tom by phone and within 10 minutes there was a quote in my in box. WOW Thank you Tom and Thank you EU Automation!
2 months ago
Paulo Pereira
Excellent service and communication…
Excellent service and communication from Alex Bailey. He truly goes above and beyond to ensure his clients are 100% satisfied. The entire process was seamless, and his attention to detail made a huge difference. Highly recommended for anyone looking for amazing service!
2 months ago
Gary
Tom Higgins did a great job at getting…
Tom Higgins did a great job at getting us the part we needed. He saw a concern with the part a verified before shipping.
3 months ago
Lessle Smith
Thomas Higgins has gone above and…
Thomas Higgins has gone above and beyond to make things happen for my facility. His customer service and knowledge were an asset in helping me with my order and the logistics challenges!
4 months ago
Our world, made possible by manufacturing. Manufacturing made possible by EU Automation.
Discover how we do our part to keep your production lines moving.