steve
Got hold of Sime for a Carrier card for…
Got hold of Sime for a Carrier card for a chiller. Machine down in a factory. Received the new card in express time machine and plant now up and running fantastic service form Sime
3 months ago
2CDL201508R3515
ABB 2CDL201508R3515 available at EU Automation. Get in touch today for a quick price.
Based on over 4900 reviews
Full 12-month warranty
Available for dispatch immediately
We deliver worldwide
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
All orders are subject to product availability. See our T&Cs.
Ask our team
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
ABB 2CDL201508R3515 is a feeder terminal designed for use with E90 fuse disconnectors and 1-phase PS…CB busbar systems. Also identified by the type code AST 35/15-1 CB, this component provides a practical connection point for feeding copper conductors into DIN rail-mounted distribution assemblies.
Built for ABB pro M compact® installations, the 2CDL201508R3515 supports copper conductors up to 50 mm² and is suitable for AC and DC applications. It is rated up to 1,000 V AC/DC under UL and up to 1,000 V AC or 1,500 V DC under IEC, with current ratings of 115 A under UL and 160 A under IEC. The terminal features a grey PA66 housing, brass chassis and zinc-plated steel terminal screw, with IP20 protection.
This feeder terminal is commonly used in control panels, distribution boards and supplementary protection circuits where reliable line-side connection to busbar-fed E90 devices is required. Its compact single-phase design makes it suitable for structured electrical assemblies where secure conductor termination and compatibility with ABB busbar accessories are essential.
Built for ABB pro M compact® installations, the 2CDL201508R3515 supports copper conductors up to 50 mm² and is suitable for AC and DC applications. It is rated up to 1,000 V AC/DC under UL and up to 1,000 V AC or 1,500 V DC under IEC, with current ratings of 115 A under UL and 160 A under IEC. The terminal features a grey PA66 housing, brass chassis and zinc-plated steel terminal screw, with IP20 protection.
This feeder terminal is commonly used in control panels, distribution boards and supplementary protection circuits where reliable line-side connection to busbar-fed E90 devices is required. Its compact single-phase design makes it suitable for structured electrical assemblies where secure conductor termination and compatibility with ABB busbar accessories are essential.
| Specification | Description |
|---|---|
| Manufacturer | ABB |
| Part Number | 2CDL201508R3515 |
| Type Code | AST 35/15-1 CB |
| Product Type | Feeder terminal with pin contact |
| Product Range | PS…CB busbar accessories |
| Intended Use | Designed for connecting copper conductors to DIN rail devices within ABB pro M compact installations |
| Compatible Devices | Suitable for E90 fuse disconnectors with 1-phase PS…CB busbars |
| Standards | UL508, UL486A, CSA C22.2, IEC 60999 |
| Rated Voltage | UL: 1,000 V AC/DC; IEC: 1,000 V AC / 1,500 V DC |
| Rated Current | UL: 115 A; IEC: 160 A |
| Conductor Type | Copper conductors |
| Conductor Cross Section | Solid or stranded: 6–50 mm²; flexible with ferrules: 6–35 mm² |
| AWG Range | Solid or stranded: 10 AWG to 1/0 AWG; flexible with ferrules: 10 AWG to 2 AWG |
| Stripping Length | Approximately 14 mm / 9/16 inch |
| Tightening Torque | 4.0–5.5 Nm depending on conductor size |
| Housing Material | PA66 |
| Housing Colour | Grey, RAL 7035 |
| Chassis Material | Brass |
| Terminal Screw Material | Zinc-plated steel |
| Protection Degree | IP20 |
| Approvals and Compliance | cULus listed to UL508; CE, RoHS and REACH compliant |
| Weight | 0.025 kg per piece |
| Pack Unit | 25 pieces |
| Commodity Code | 853690 |
What is this feeder terminal used for?
This feeder terminal is used to connect copper conductors to DIN rail devices within ABB pro M compact busbar systems. It is intended for use with E90 fuse disconnectors and a 1-phase PS…CB busbar arrangement.
Which busbar configuration is it designed for?
It is designed for 1-phase busbar applications, specifically where an E90 fuse disconnector is used with a compatible PS…CB busbar.
What type code is associated with this feeder terminal?
The type code is AST 35/15-1 CB. This corresponds to ABB order code 2CDL201508R3515.
What conductor sizes can be connected?
The feeder terminal accepts solid or stranded copper conductors from 6 to 50 mm². Flexible conductors with ferrules can be used from 6 to 35 mm².
What AWG conductor range is suitable?
For solid or stranded conductors, the suitable range is 10 AWG to 1/0 AWG. For flexible conductors with ferrules, the suitable range is 10 AWG to 2 AWG.
What is the rated current?
The feeder terminal is rated at 115 A under UL data and 160 A under IEC data, subject to the limits of the connected device terminal.
What is the rated voltage?
The rated voltage is 1,000 V AC/DC under UL data. Under IEC data, it is rated for 1,000 V AC and 1,500 V DC.
What standards does it comply with?
The feeder terminal is listed for use with standards including UL508, UL486A, CSA C22.2 and IEC 60999. It is also stated as CE, RoHS and REACH compliant.
What materials are used in its construction?
The housing is made from grey PA66, the chassis is brass, and the terminal screw is zinc-plated steel.
What is the protection rating?
The feeder terminal has an IP20 protection degree when installed as intended within a suitable electrical assembly.
What stripping length is required for conductors?
The recommended conductor stripping length is approximately 14 mm, equivalent to 9/16 inch.
What tightening torque should be used?
The tightening torque depends on conductor size: 4.0 Nm for 6 mm², 4.5 Nm for 8 mm², 5.1 Nm for 10 to 16 mm², and 5.5 Nm for 25 to 50 mm² conductors.
Can multiple feeder terminals be installed side by side?
Yes, multiple single-phase feeder terminals can be installed side by side, provided the required creepage and clearance distances are observed for the application.
What should be checked when selecting this feeder terminal?
Check that the connected E90 device, 1-phase busbar, conductor size, rated current and installation clearances are all suitable for the intended panel arrangement.
- Line-side power distribution for DIN rail-mounted devices
- Feeding 1-phase PS…CB busbar systems in control panels
- Connecting copper conductors to ABB E90 fuse disconnectors
- Supplementary protection circuit assemblies using UL 508 components
- Compact panel wiring where space-efficient feeder terminals are required
- Industrial distribution boards using modular protective devices
- Machine control cabinets with DIN rail-mounted protection equipment
- AC and DC control circuit power distribution
- Panel builds requiring high-current feeder connections up to 115 A UL or 160 A IEC
- Electrical assemblies using solid, stranded or ferruled copper conductors
- Busbar-fed protection layouts for quicker and neater wiring
- OEM equipment panels requiring reliable feeder connection accessories
This content has been produced using multiple sources. EU Automation takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Delivery
- Logistic partners UPS, FedEx and DHL
- International delivery available
- Premium nine hour delivery service available to anywhere in Europe
- Same day dispatch from group stock
Warranty
All parts new or reconditioned are covered by EU Automation 12 month warranty
Returns
No hassle returns policy
Dedicated customer support team
Payment
Trade CreditWe understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
Payment optionsWe accept Bank transfers and the following methods of payment:
All transactions are handled securely by HSBC and HSBC Merchant Services. For more information, please visit our dedicated payments page.
Services
Sourcing your part
Global supplier of quality automation and control components
Service Exchange
Dispose of your old unit by exchanging it for a working part.
Repair
A comprehensive repair service for faulty equipment.
Customer reviews
steve
Daniel
Excellent customer service...
Alex Bailey is my main point of contact at EU Automation...he is extremely friendly, has exceptional customer service skills and always offers great pricing & lead times.
4 months ago
Jerry Schrink
Tom Higgins provided amazing service
Tom Higgins provided great prompt service. I contacted Tom by phone and within 10 minutes there was a quote in my in box. WOW Thank you Tom and Thank you EU Automation!
5 months ago
Paulo Pereira
Excellent service and communication…
Excellent service and communication from Alex Bailey. He truly goes above and beyond to ensure his clients are 100% satisfied. The entire process was seamless, and his attention to detail made a huge difference. Highly recommended for anyone looking for amazing service!
5 months ago
Gary
Tom Higgins did a great job at getting…
Tom Higgins did a great job at getting us the part we needed. He saw a concern with the part a verified before shipping.
5 months ago
Lessle Smith
Thomas Higgins has gone above and…
Thomas Higgins has gone above and beyond to make things happen for my facility. His customer service and knowledge were an asset in helping me with my order and the logistics challenges!
6 months ago
Our world, made possible by manufacturing. Manufacturing made possible by EU Automation.
Discover how we do our part to keep your production lines moving.