QUINT-DC-UPS/24DC/10 Phoenix Contact

What type of device is this?

It is a 24 V DC uninterruptible power supply unit for DIN rail control cabinet installations. It helps maintain DC power to connected loads during short input voltage interruptions and includes an integrated 1.3 Ah battery module.

What output rating does it provide?

The unit provides a nominal 24 V DC output with a nominal output current of 10 A, giving an output power of approximately 240 W.

What input voltage range is required?

The input is rated for 24 V DC systems and operates across a DC input voltage range of 22.5 V DC to 30 V DC.

How long can it buffer the load during a power interruption?

Typical buffer time is around 1.5 minutes at 10 A and around 20 minutes at 2 A. Actual hold-up time depends on the load current, battery condition, ambient temperature and installation conditions.

Does it have an integrated battery?

Yes. The QUINT-DC-UPS/24DC/10 has an internal 1.3 Ah battery module, so it is a compact DC UPS solution without requiring a separate external battery pack for its standard configuration.

Can multiple units be connected in parallel?

No. The datasheet specifies that parallel connection is not permitted. Series connection is listed as possible.

What are the main dimensions?

The unit measures approximately 100 mm wide, 130 mm high and 125 mm deep, making it suitable for mounting in industrial control panels with sufficient clearance.

How is it mounted?

It is designed for mounting on a horizontal 35 mm DIN rail in accordance with EN 60715. The recommended mounting arrangement allows alignment horizontally with 0 mm spacing and vertically with 50 mm spacing.

What connection type is used for wiring?

The input and output use pluggable screw connections. The accepted conductor cross-section is 0.2 mm² to 2.5 mm² for solid or flexible conductors, equivalent to AWG 24 to AWG 12.

What status indications are provided?

Status is indicated using LEDs and floating signal outputs. The unit includes Power OK, Alarm, Battery Charge and Battery Mode indications, helping panel builders and maintenance teams monitor operating state at a glance.

What signalling contact ratings are provided?

The floating signal outputs are rated for a maximum switching voltage of 30 V AC/DC and a continuous load current of up to 1 A.

What approvals and standards are associated with it?

The unit is associated with approvals and standards including UL/C-UL listed UL 508, UL/C-UL recognised UL 60950, UL/C-UL listed UL 1604 Class I Division 2, plus shipbuilding approvals such as ABS, DNV and GL depending on documentation version.

What environmental rating does it have?

It has an IP20 degree of protection and is intended for use in enclosed control cabinets. The operating ambient temperature range is 0 °C to 50 °C, with up to 95% relative humidity at 25 °C, non-condensing.

What is the typical efficiency?

The stated efficiency is greater than 91%, helping reduce heat generation in control cabinet power systems.

What is the recommended customs classification?

The commodity code recorded for this item is 850440, which is commonly used for static converters and power supply equipment. Some Phoenix Contact documentation also lists more specific tariff references depending on region and document issue.