SH30702P01A2000

Which automation range is this servo motor compatible with?

The SH30702P01A2000 is designed for the Schneider Electric PacDrive 3 range. When selecting it for an installation, check that the drive, feedback interface and mechanical arrangement match the application requirements.

What is the maximum mechanical speed?

The maximum mechanical speed is 8,000 rpm. This is distinct from the nominal operating speed, which varies according to the specified voltage and operating conditions.

What nominal output power does the motor provide?

The datasheets list nominal output ratings of 340 W at 115 V, 660 W at 230 V, 1,190 W at 400 V and 1,360 W at 480 V. Select the rating that corresponds to the intended drive configuration rather than treating these figures as interchangeable.

What are the nominal speed ratings?

The listed nominal speeds are 1,500 rpm at 115 V, 3,000 rpm at 230 V, 6,000 rpm at 400 V and 7,200 rpm at 480 V.

What type of encoder is fitted?

The motor has an absolute single-turn SinCos Hiperface encoder with a speed feedback resolution of 128 periods. Single-turn feedback identifies angular position within one revolution rather than recording position across multiple revolutions.

Does the motor include a holding brake?

No. This variant is supplied without an integrated holding brake. Applications requiring the axis to remain stationary when motor torque is removed need a separately assessed holding arrangement.

Does the shaft have a keyway?

No. The SH30702P01A2000 has a smooth, unkeyed shaft measuring 11 mm in diameter and 23 mm in length. The coupling or transmission component must suit this shaft configuration.

What are the flange and mounting dimensions?

The motor has a 70 mm flange and a 60 mm centring collar with a depth of 2.5 mm. Four mounting holes, each 5.5 mm in diameter, are arranged on an 82 mm pitch circle.

What degree of ingress protection does the motor offer?

The motor body is rated IP65. The shaft bushing is listed as IP65 with the shaft seal arrangement and IP54 without a shaft seal ring. Check the actual sealing configuration when assessing suitability for the installation.

What are the motor's overall length and net weight?

The listed motor length is 187 mm and the net weight is 2.8 kg. Allow additional installation space for mating connectors, cable routing and the attached coupling.

How is the motor cooled?

The motor uses natural convection rather than a cooling fan. Its installation should allow heat to dissipate appropriately, with operating conditions assessed against the required motor performance.

What are the current and peak torque ratings?

The continuous stall current is 2.9 A, the maximum current is 11.8 A rms and the peak stall torque is 7.6 Nm. Peak torque is not a continuous operating rating.

What shaft loads are specified?

The maximum axial force is 80 N. The permitted radial force depends on speed, with listed limits of 710 N at 1,000 rpm, 490 N at 3,000 rpm and 390 N at 6,000 rpm. Check the relevant load limit when selecting pulleys, couplings or other shaft-mounted components.